Product Categories
(Total 12 Products for Gold Plated Brass Machining Parts)
Gold-plated brass machining parts
This is a Gold-plated brass machining parts,In order to increase the over-signal function of brass parts.Brass machined parts surface polishing and then gold-plated,Can transmit the signal of 1000MHz.We supply tens of thousands of machined brass pieces and are widely used in slip rings. We have three types of...
Due to the negative electrode potential of aluminum, the parts are prone to electrochemical corrosion during use. Therefore, aluminum alloy is usually used after surface treatment. Gold anodized aluminum uses a silver staining method for machining. After Gold anodising aluminium, a porous gold anodized aluminum oxide...
Nickel Plated Precision CNC MachinIng Parts
Nickel Plated CNC MachinIng, Parts the material is Aluminum6061-T6, the surface can get a very good finish, corrosion resistance. We use the EPE Foam product packaging, to ensure that products are not scratched. Before and after nickel-plated products are different sizes, in the machining process must be on the repair...
Nickel Plated CNC Aluminum Parts
Nickel Plated CNC aluminum parts provide good surface hardness. Increased corrosion resistance and high temperature oxidation resistance of the Aluminum CNC parts, while giving CNC Aluminum parts a better appearance. Buildre Group Co., Ltd is a professional manufacturer of CNC and CNC Machining Services and Molding...
Silver plated machining brass parts
This is a brass for machining on slip ring,Surface silver plating increases conductivity.Brass ring good conductivity and thermal conductivity, and high hardness, good wear resistance.We will be brass machining parts used in the slip ring, you can transmit 1000MHz signal. We have three types of machining...
This is a silver plated brass turned parts for medical equipment. Brass material has high hardness and good wear resistance. Silver plated can increases the electrical conductivity of the brass turned parts. We have three types of machining copper: copper, brass, bronze. Brass is added in the copper 25% to 40% Zn and...
Silver Plating Aluminium Parts Machining
This is a silver-plated aluminum parts, our company offers aluminum surface silver-plated service. A silver-plated aluminum parts housing, the contact resistance even smaller, better conductivity. Aluminum and its alloys are much more difficult to silver plating than conventional copper pieces, and the process is...
Chemical Nickel Plating Aluminum Parts
The application of chemical nickel plating aluminum parts in the industrialized countries of the world experienced an unprecedented development in 80s, with an average annual net growth rate of 10% to 15%; Expect chemical nickel plating aluminum parts applications will continue to develop, into the mature period of...
Silver Plated Brass Parts for Slip Ring
Silver Plated Brass Parts for Slip Ring Slip rings are usually made of copper or brass parts, brass parts for slip ring has wearable and well conductive, and are plated with gold, silver, or rhodium according to various applications. The brass parts for slip ring has good sliding characteristics, so the utility model...
Precision brass machined parts
Our technical team has very good experience in machining brass,brass machined parts including brass plate, brass rod, brass tube.The binary alloys of copper and zinc are often referred to as "yellow copper"Common models are C26000, C27000, C28000, C33000.High-speed milling machining of brass can get excellent surface...
High precision machining brass parts
Brass has a good CNC machining performance. Because brass has excellent wear resistance, so tool wear should be considered in the machining process. High-speed turning and milling machining brass can get a good finish. We also provide secondary CNC machining services, the surface finish of CNC brass parts can up to...
CNC machining turning brass parts
Brass has excellent cnc machining turning performance, high-speed machining turning under the brass can get excellent surface finish.Brass is added in the copper 30% to 40% Zn element.So brass is higher than the hardness of copper, have better resistance to abrasion and corrosion resistance,Machining turning brass...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
